(If your support concerns activation/deactivation, please use our License/Activation Support topic.)
(Major license management update of Net Deed Plotter® (to version 5.60), as posted for download on 03-06-15)
The v5.60 changes relative to license management are discussed in the License Support topic at this website. That topic contains important information and advice. You will learn how to handle activation, deactivation, moving licenses, adding licenses and more. Please refer to that topic.
In addition to license management, two minor changes were made beginning with Net Deed Plotter, v5.60 and a minor change for v5.61.
1. Fixed bug that, in some cases, resulted in the date and title needing reset in the title box.
2. Added command in setup in an attempt to cause Windows file associations to always open a ndp file by clicking on it.
3. Posted v5.61 to make minor grammatical changes and an internal change to .exe file. (Though not necessary, v5.61 may be downloaded to replace v5.60 at no additional charge if you are a currently registered, licensed user of version 5.60.)
Most of the information below remains from older posts made before March 2015. Some of that information, including activations/deactivations and general license management, may no longer apply.
The information below is broken into two topics. The first is Update information. The second is FAQ.
The older Deed Plotter®, Deed Plotter+®, Deed Plotters Series II and Deed Plotter+® Series III were designed for DOS. The remaining versions were designed for Windows. In addition to these major releases, many minor updates for them were released. We no longer ship DOS versions or out-of-date Windows versions.
Greenbrier Graphics includes a pdf manual in the Help menu of Net Deed Plotter®. If you are a beginner, you may prefer to read the "Getting Started" tutorial (also in the Help menu) before refering to the manual. You should then use the manual and Help topics for a more in-depth understanding.
The manual for version 5.5 of Net Deed Plotter can be opened from the "Help" menu. The manual (pdf) can also be downloaded by using the link below:
PLEASE CLICK HERE TO DOWNLOAD THE NET DEED PLOTTER MANUAL (for v5.5) (Note: This manual will be replaced in a few days with a v5.60 manual.)
Our current release of Net Deed Plotter (Version 5 of Deed Plotter) has the following changes and enhancements relative to its immediate predecessor (version 4.20): This list has not been completed.
The most important changes found in version 5 of Deed Plotter (Net Deed Plotter) are improvements of existing features. For example, all releases of Deed Plotter+ for Windows permitted tracts to be moved with the mouse, but the new release simplifies this by permitting the text and tracts to move as the mouse moves.
We did everything possible to make Deed Plotter even easier to use.
A list of changes and features new to Version 5 (Net Deed Plotter as of 2009) follow:
- Icons were added, and the menus were made easier to understand and use.
- The Deed Call Editor has been redesigned.
- Cardinal direction (due North, East, South, & West) can be entered directly.
- The entry of standard section data is improved.
- The map is always drawn in a Print Layout view.
- The drawing can be saved as a bitmap.
- Tract information is visible by simply moving the mouse into the tract.
- The mouse can drag tracts and text as you move the mouse.
- Revised Deed Conversion (again).
- Text can be sized as needed, and there is a large font selection.
- You have several options related to the data and border to be shown on the paper.
- Images (topo, arial photos etc.) can be shown in the background.
- The optional entry of coordinates has been simplified.
- Coordinates can be saved as a text file.
- Dxf files can be exported as feet or as meters.
The lists that follow are improvements made to Net Deed Plotter since its release on 12-12-07:
Updates to newer versions of Net Deed Plotter are cumulative.
This means a newer version will include all previous improvements.
(Minor update of Net Deed Plotter® (to version 5.50), as posted for download on 06-11-13 at 12:47PM)
For those who have used previous versions of Net Deed
Plotter®, the list below introduces changes that became available June 6, 2013.
- The manual can now be opened from within the Help Menu.
- As per customer requests, the tract(s) will no longer
automatically re-center, but rescaling remains. This is to avoid unwanted changes in the
relative position of text on the map.
- Permits older version “.des” file extensions to be
upper or lower case.
- When the Mouse is near a line, its shape will change to
an upper arrow in normal map mode.
When you are scaling distances with the mouse, remember that the
mouse senses a corner or line if only near one. You must visually move the mouse to a
more exact position.
- As per customer requests, when using automatic Deed
a hyphen can now be used between the degrees and minutes, and the minutes
and seconds. This is not relevant
to the manual entry of deed calls.
- The maximum deed calls per file has been increased to
5000, the number of tracts to 500, and the number of lines with mouse to
- As per customers request, the next default text font
type, size, and style within any file will be the same as the last font
created. This persists even if the
file is closed and reopened, but does not effect any other file or previous
font with a given file.
- New Internet license
De-Activation options are now available. This was always possible,
but is now easier. You should de-activate (save) your license if the
computer is to be modified, re-imaged, or moved (re-activated) to
- The method of creating custom geo-reference files
(World files) has changed significantly.
This is a detailed topic explained in “Net Deed Plotter Help.” To find it, select “Net Deed Plotter
Help” from the Help Menu, then select the “Creating TFW and JGW files”
sub-topic from the “Background Image” topic. (This is not explained in the manual.)
A PDF writer was considered for Net Deed Plotter, but
not added because there are several available online. Some are free, and
there are others that are very affordable. If you need a PDF writer, we
suggest one that installs like a printer. You then have the option to
simply select a PDF "Print" menu option. Some versions
have unwanted advertising etc. embedded, but this can be avoided by paying a
reasonable fee. For example, a PDF writer named "PDF995"
can be downloaded for free, but a key can be bought that will remove the
If downloaded, see Getting Started Tutorial, Help, & Manual for more information.
(Major update of Net Deed Plotter (to version 5.40), as posted for download on 05-18-09 at 3:05 PM EDT.)
(Updated to 5.41 on May 20, 2009 to improve X64 installations using 32 bit installer.)
(Updated to 5.42 on September 01, 2009 to improve Deed Conversion, and to permit pasting deed calls & coordinates into Excel.)
The upload, mastering and posting for version 5.42 was 02-04-2011. V5.42 installs better than previous versions in Windows 7.
Important: This update/upgrade contains all improvements of previous releases and a significant change in the licensing system.
If your version of Net Deed Plotter is older than V5.30 (was released prior to 03-20-09), there is a $100 fee for this update/upgrade.
(See update history below for all changes to date.)
(First minor update of Net Deed Plotter, as posted for download on 02-04-08.)
- Fixed problem with the printing of hatched (shaded) tracts.
- Added the ability to use the numeric key pad for quick entry of deed calls.
- Modified rotation to permit quick and easy rotation by using Page Keys and Arrow Keys.
- Fixed problem concerning the printing of a range of pages.
- Made improvements to Deed Conversion.
- Changed default registry and file paths to conform with Vista recommendations.
(Second minor update of Net Deed Plotter, as posted for download on 02-14-08 at 4:00 PM EST.)
- Improved compatibilty on 64 bit systems. (important for users of Vista Ultimate)
- Improved Deed Conversion.
(Third minor update of Net Deed Plotter, as posted for download on 03-12-08 at 2:30 PM EDT.)
- This is a very minor update that uses a new form to explain and simplify license activation.
If you have the "02-14-08" version, you may not need to update unless you want the new license activation process.
(Fourth minor update of Net Deed Plotter, as posted for download on 03-26-08 at 6:00 PM EDT.)
- No changes to Net Deed Plotter code, but added a "Getting Started" menu option in the Help menu, and changed information concerning license activation (very minor update). If you have the "02-14-08" version or later, you may not need to update unless you want the new license activation process.
(Fifth minor update of Net Deed Plotter, as posted for download on 04-09-08 at 5:40 PM EDT.)
- No changes to Net Deed Plotter code, but changed introduction of "Getting Started" as found in the Help menu, and changed information concerning sources for optional image files (very minor update). If you have the "02-14-08" version or later, you may not need to update.
(Sixth minor update of Net Deed Plotter, as posted for download on 04-23-08 at 5:05 PM EDT.)
- Changed code in Net Deed Plotter to fix labeling of delta along certain curved lines on the map.
- Changed code to enable the new name of a file to show in the data box without reopening the file.
- Made minor changes to Help and Getting Started. (Explain moving license in Help.)
(Seventh update of Net Deed Plotter, as posted for download on 05-22-08 at 7:20 PM EDT.)
There are no critical issues; however, this update is signficant enough to warrant downloading regardless of your current version of Net Deed Plotter.
- Deed Conversion now accepts a rare, unusual degree symbol found in some descriptions.
- Improved single digit entry of bearings. (In rare cases Net Deed Plotter would not accept entry of a single digit for degrees in the bearing.)
(Eighth update of Net Deed Plotter, as posted for download on 08-18-08 at 7:02 PM EDT.)
This update is signficant enough to warrant downloading regardless of your current version of Net Deed Plotter.
- Fixed labeling of the minutes and seconds symbols on printout.
- Now allows the slash (/) to also be used on cardinal directions that precede the true POB.
- Prevent coloring/hatching from including POB calls in the fill process.
- Fixed problem related to certain interior angles.
- Added information in Help files pertaining to finding digital maps.
(Ninth (V5.30) & tenth (V5.31) update of Net Deed Plotter as posted for download on 03-23-09 at 10:48 AM EDT.)
Version 5.30 is a very significant (major) update and results from the first year of feedback from users of Net Deed Plotter.
There are 12 improvements. There will be a $100 fee to update from v5.xx to v5.40 or later.
- Contains all changes made in previous versions.
- Can directly paste the map to the clipboard.
- Added a "Right Click" (cut, copy, paste) context menu for use with the Deed Call Editor.
- Added a MRU (Most Recently Used) list to the File menu.
- Can now open a background image and/or draw with mouse without first placing calls in the editor.
- Uses special crosshair when drawing with mouse. Provides more precision and reminds user mouse is being used.
- Curve Editor will compute an unknown radius if adequate data is given.
- Can move from field to field in the curve editor by using TAB, ENTER, or UP/DOWN Arrow keys.
- Caret (In Deed Call Editor) moves to next line when Curve Editor Data is accepted.
- Startup of Net Deed Plotter is faster because printer information is saved.
- Made several improvements to Deed Conversion.
- Created v5.31 on 03-23-09 to add requested change that permits showing distance only on a deed call line.
(Eleventh update of Net Deed Plotter as posted for download on 04-16-09 at 3:18 PM EDT.)
- Permits color coding for tract lines (not tract color) if there are "Keeps and Exceptions." See "Keeps and Exceptions" topic in the "Multiple Tracts" Help topic for more information.
- Made several improvements to Deed Conversion.
(Twelth update of Net Deed Plotter as posted for download on 05-12-09 at 5:02 PM EDT.)
This update (Version 5.35) is signficant enough to warrant downloading for those who do Deed Conversion.
(Note: v5.35 was replaced with v5.41, and v5.41 replaced with v5.42 on 02-04-2011 at 10:40 PM EST.)
- On v5.42, Improved Deed Conversion, permited pasting deedcalls/coordinates into Excel. (Also installs well in Windows 7)
Version 5.40 & later are NOT minor updates/downloads and WILL invalidate any Net Deed Plotter license prior to 5.30. If your version is prior to v5.30, do not download Net Deed Plotter. Please contact Greenbrier Graphics for details.
To determine whether this update applies to you, select About Deed Plotter. (This is a menu option within the Net Deed Plotter Help menu.)
If there is no version date in the "about" dialog box, or that date precedes 05-18-09, we recommend you consider this new version.
Frequently Asked Technical Questions:
As we support our customers over the years, we notice certain common questions that cannot be made visible enough in the manual to catch every customer's eye. So, before you call, always refer to this topic to see if your answer is given here. If you do call, please be at your computer and ready to run Deed Plotter. It is important to provide us with your version of Deed Plotter. Unless you are using an old DOS version, the version can be found by selecting "About Deed Plotter" from the "Help" Menu. You are now ready to explain the details concerning your issue.
Q1: How do I enter a deed call of "east 153 feet"? This question applies to north, south, east, and west and any distance.
A1: See Cardinal Directions in manual. Be careful when deciding whether calls are valid cardinal directions or are actually defective. "East 153 feet" can be entered as "n90e 153." Our new Version 5 of Deed Plotter (Net Deed Plotter) will accept the direct entry of a cardinal direction. "East 153" can be entered as "e 153".
Q2: How do I enter a deed call of "southwesterly about 135 feet"? This question applies to any vague direction or distance.
A2: You don't. No person or program can solve a deed that has several bad deed calls. Reject worthless descriptions. Do keep in mind that Deed Plotter may solve some descriptions that have a defect.
Q3: How do I place Deed Calls on the boundary lines or Circle the Corners of a tract?
A3: To place deed calls on the boundary lines, first you select (activate) the tract then click on the Show Deed Calls icon. The Lines Menu provides a sub-menu for circling corners. To select a tract, simply place the mouse in it and click the left mouse button.
Q4: How do I move the tracts (and text) relative to the paper?
A4: You should read the help topics that pertain to this. Basically, tract movement is achieved by selecting the tract to be moved, then click the Translate (Move Tracts) icon. The tract(s) will now move with the mouse if the Left Mouse Button is down.
Q5: How do I hide some of the deed calls for a tract in my printout?
A5: There are two methods to do this if the call is not a curve. You can double click on the line that is to not be labeled. This will toggle the call on or off. You can also select the corner at the beginning of the line that is to not be labeled, then select the hide (or show) deed call option in the Limes Menu. The latter method also works for curves.
Q6: How do I properly offset a tract that has deed calls before the "True Point of Beginning"?
A6: Place a slash mark ( "/" ) in front of those calls that offset the true P.O.B. There are several examples of this in the manual and a brief example on this Web Page (below) .
Q7: How do I place multiple tracts (multi-tracts) in their proper position?
A7: In Townships and Sections this is usually done by offsets; however, any multi-tract can be moved with the mouse. Most customers prefer to move the tracts with the mouse. There is a help topic that walks you through an example of this.
Q8: Why will the editor not accept a rectangular formatted tract? (Example= "north 100 feet of the southwest of the northwest...")
A8: It will. Do not place "@0" on this or the preceding line. You are probably confusing this with a metes and bounds reference to a standard section. The example above would be entered as "n100,sw,nw,5,3n,4e." (We assumed section 5, 3 north, 5 east.) A metes and bounds tie to a section would begin with a '/' mark. The following example entry ties a simple metes and bounds tract to a section corner. The "/s34.01e 200" is a call to the true point of beginning. Ignore this example if you don't have calls to the True Point of Beginning, and you are not working with standard government sections.
"@0" would precede the following example, IF it was not the first tract entered AND it was not a rectangular formatted tract.
(Note: This information may not pertain to our new Deed Plotter version 5.)
Q9: How do I prevent a "Create Process Failed" error message when attempting Deed Conversion using Microsoft Word?
A9: This relatively rare problem is associated with networking and there is more than one solution. The error is caused by MS Word not being able to find and launch Deed Plotter. One solution offered by our customers is as follows:
- Make the user an administrator on the computer that fails to launch Deed Plotter.
- Uninstall Deed Plotter, and then reinstall Deed Plotter while logged in as this user.
- This should solve the problem. If desired, you can now remove the administrator rights of this user.
Q10: Why does the "Deed Plotter+" menu option not appear in the "Tools" menu bar of MS Word?
A10: First be certain that Deed Plotter was installed (or re-installed) AFTER MS Word was installed. If the problem persists, be certain our GW98.wll file is in the MS Word startup folder. This problem can also be caused by other MS Word Add Ins interfering with ours. This problem may be associated with Docs Open or IScrub.
Q11: When using an older version of Deed Plotter in Windows XP, I am getting a "Spaces on left or not left justified" error message.
A11: If you have determined you are entering the data correctly, but the message persists, your version of Deed Plotter may have been designed before Windows XP became popular. The error may not show for months or even years. Version 4.20 (and version 5) of Deed Plotter was designed to eliminate this error. Version 4.20 of Deed Plotter also works on older Windows platforms. (Version 4.xx is no longer available. You may want to purchase version 5.)